Kestrel 5700 Pouch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a belt pouch for the Kestrel 5700 ballistic calculator. Only for print in TPU as it is designed to have a…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 1148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is a belt pouch for the Kestrel 5700 ballistic calculator. Only for print in TPU as it is designed to have a slight drag. Kestrel is to be inserted head down as shown in pics. I added a bit of the loop part of Velcro on the sides of the Kestrel near its top to add a bit more resistance removing since the top is a tad thinner. You could probably print at 98 or 99% using TPU and be good but current print is workable.
Print Settings
Printer:
Ender 3 S1
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
30%
Filament:
Overture TPU
Black
Notes:
Print upright as in stl file.
Category: 3D Printing