Ender 3 V2/S1 - Dial Gauge Mount [X;Y;Z Axis]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3 Dial Gauge Mount
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 543
- Wydruki
- 2
- Wyświetlenia
- 3641
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a dial gauge mount so that I could perform the ‘XYZ steps Calibration’ within the written guide ‘Teaching Tech 3D Printer Calibration’. After reading the calibration guide I strived to create mounts that I could accurately measure physical distance to adjust my e-step accordingly.
If you download the file(s), please leave a like! Also please share your makes and constructive criticism for future versions. {Please note this was tested and designed on an Ender 3 S1 Pro}
Tools/Hardware Needed:
- Dial gauge - found on Amazon: “Clockwise Tools DIGR-0105 Electronic Digital Dial Indicator Gage Gauge"
- M3x8 Screw
- M3 Nut (however, with the inner diameter used the M3 screw threads pretty nice)
Current STL Files & Version(s)
- Z-Axis: {Z-Axis_Dial-Gauge-Mount_v1}
- Accommodates 'Ender 3 S1 Twin Jet 5015 Fan Duct' by TX_Ryan
- No custom air duct? See final note below
- X-Axis: {X-Axis_Dial-Gauge-Mount_v1}
- Y-Axis: {Y-Axis_Dial-Gauge-Mount_v1}
Printer Settings:
- 0.2mm Layer Height
- 15% Infill
- No Supports
Orientation:
- All mounts were printed in the same orientation as the photos
Please Note: If you DO NOT have a custom fan duct use → ‘Ender S1 Dial Gauge Holder’ by kaisarantonn