HEPA enclosure filter upcycled from Tesla model y/3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder and mounts allow to affix a filter from Tesla model 3 or Y into an enclosure.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 1037
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
My wife has a superpower of smell, and thus asks me to change filters in her car very often. I re-use them within an Ikea Pax enclosure of my Prusa i3 MK3.
The air is drawn from the top by a 120 fan. I use this one, as it is quiet and efficient: https://amzn.to/3TCXTCe
I printed the top in PETG, and the holders in ABS. both survive hot enclosure well. You need one filter housing and 4 side legs/holders. This is mounted on the enclosure ceiling, against the back wall, by a 3.25 #8 screw, via a 10mm sheet of Styrofoam. You can adjust the screw length/position in the OpenScad file.
This filter comes handy when printing stinky ABS and keeps the air clean.