1 / 3
85T HTD 5M pulley for hoverboard wheel motors
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toothed HTD style pulley to use a hoverboard wheel motor to power something else.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 145
- Wydruki
- 0
- Wyświetlenia
- 899
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 11)Remiksy (0)Kolekcje (17)Powiązane
First used the 28mm width which was not full width, it shifted to the side.
Probably better to use the full width 35mm, and glue with something that will stick well to PETG.