1 / 2
Headphone Stand for Humanscale M/FLEX Monitor Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A headphone stand that mounts to the Humanscale M/FLEX monitor mount.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 442
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Requires an M4 nut and bolt to clamp in place.
Printing in ABS let me pry it open enough to put it on without removing the monitors and sliding down over the top. Not sure if other plastics will be able to do that without snapping.
As a rule of thumb, I usually scale my ABS prints to 100.5%, so it may be a good idea to do that for best fit.