Warmind Rasputin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Destiny 2 replica for Rasputin Warmind
- Ocena
- 0 / 5
- Polubienia
- 87
- Pobrania
- 252
- Wydruki
- 0
- Wyświetlenia
- 1839
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Warmind Rasputin figure from Destiny 2, a game by Bungie.
I design this based on the pictures I found, it's not 100% accurate but, for the size of the print, I tried to include as much details as possible.
You can print with your desired quality, this is printed with 0.2mm on an Ender 3 v2.
Supports are needed for the majority of the parts (apart from the two brackets).
There are two supports: one can receive a standard 3x AA (1,5V) sized battery case to power the LED that can be installed on the “led-top-bracket_01”; the other has holes to let a USB cable through, again for powering the LEDs. I used a 5V LED strip; the more LED on it, the better.
The main Rasputin prints have two 10x2mm magnet each, glued inside the designed slot to assure the parts stay together.
The assembly doesn't require glue (apart from the magnets).
The models are sized to be printed on a 220x220mm bed, but you can scale them at pleasure, the only thing to be aware of it's the hole for the USB cable, depending on how your LED strip is designed (I have a USB cable that has Dupont connectors at one end).