Volvo V90 trunk shopping bag hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shopping bag hook that connects to Volvo V90 trunk fittings. Two versions: fixed and removable.
- Ocena
- 4,6 / 5
- Polubienia
- 42
- Pobrania
- 209
- Wydruki
- 5
- Wyświetlenia
- 1790
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Shopping bag hooks which connects to the unusable trunk hooks of Volvo V90.
I have created two versions:
- Snap on version that is easy to mount and dismount.
- Fixed version that mounts with a separate backplate and screws (no holes need to be drilled to the car). You can choose the backplate with nut inserts or threaded heat inserts.
The two screws for the fixed version are 3mm x 16mm. The threaded 3mm insert is 4mm long and 5mm outer diameter.
I have printed these in thought matte black PLA
- 4 perimeters
- 0.2mm layer height
- 0.4mm layer width
- 40% infill for the hooks and 30% for the backplates
The snap on hook should be printed on its side and needs support everywhere. I used tree support in Cura since its much easier to remove but normal support is also OK.
The fixed hook should be printed standing up and needs build plate support.