1 / 4
AirTag Holder for ZipTie
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold an AirTag so it can be ziptied to an object.
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 2
- Wyświetlenia
- 364
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a quick/simple model to hold an AirTag to an object with a ZipTie. ZipTie holes are 2x5mm and there are a few drain holes as well.
Designed for 0.32mm layer height, 1mm nozzle & PETG (since that's my current configuration :) ) but should work fine with smaller dimensions and other materials.
No supports required, just print on the bottom surface.