D20 Cat Treat Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
D20 Cat Treat Toy Remix of https://www.thingiverse.com/thing:92817
- Ocena
- 4,75 / 5
- Polubienia
- 55
- Pobrania
- 262
- Wydruki
- 8
- Wyświetlenia
- 1094
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- GNU General Public License v2.0
I really liked the design by kpimmel.
I removed the numbers which made it easier and faster to print.
It's now better orianted for printing
Fixed the size as it was too small for standard regular cat food/treats (120% the original), left the opening the same.
The lighter it is the easier it is for the cats. Would recommend max 2 walls on 0.4 nozzles, I use a 0.6mm nozzle so I did 1 wall at 0.8mm line width.
10% grid or gyriod infill is sufficient.
Final print was 15 grams.
Can be printed at any layer height.
No support.
Cooling turned off on me, that's why the top looks a bit messy. It should print fine for you.