Bottle holder with an image for bottle up to diameter 90mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The bottle holder is designed for applications where a bottle holder should be swinged away if it is not in use.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 648
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
The bottle holder is designed for applications where a bottle holder should be swinged away if it is not in use.
Design goals
- suitable for bottles with a diameter of 90mm
- foldable to save space if not in use
- shall not clatter if folded and also not if its in use
- shall be easy to fold
- all parts shall be printed
- free space for an image related to application where bottle holder is assembled
Features
- linear guide with high clearance between frame and ring plate if bottle holder is folded
- linear guide with small clearance between frame and ring plate if bottle holder is opened
- swivel joint (2x) to connect support plate and frame
- flat spring (2x) to avoid clattering if bottle holder is folded
- bores to fix bottle holder to e.g. a wall
- image suitable for a fishing boat
Printing
1. Material: PETG
2. Parts:
The frame and the ring plate need partial supports, but it is easy to print. For the frame I recommend to print the part upright. The ring plate and the support plate should be printed with the huge surface on the print-bed.
Support plate with image
- Place the support plate and the image to an area of the print bed where no reference point is checked before printing.
- Print in two steps. First step is to image with a layer height of 0,4mm (2x0,2mm) with e.g. color white. In a second step print the rest with a color of e.g. black.
Part list
Printed parts (see .stl)
Assembly instruction
- Remove supports and deburr sharp edges if required.
- Add support plate to the frame and press swivel-joint from both sides through the holes.
- Check if position of support plate in working position is close to 90°. If not, remove rest of support from frame.
- Add ring plate in horizontal position to linear guide.
- Add a bottle to check the function of the bottle holder.
- Remove bottle and fold the support plate in vertical position into the frame.
- Add ring plate to linear guide by gently pushing the support plate against the flat springs.
- If functional test is fine, mount the bottle holder by using fixing holes.
Disclaimer: The bottle holder is not checked against legal safety rules. Use of the bottle holder is on your own risk.
Note:
If you do not want to use the image, use the .stl file without image.