Quick hinge for easy removal door Anycubic 4MAX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hinge to easily remove the door of the Anycubic 4MAX or DIY closed chamber. There are two STL-files, one with the…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 238
- Wydruki
- 2
- Wyświetlenia
- 717
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A hinge to easily remove the door of the Anycubic 4MAX or DIY closed chamber.
There are two STL-files, one with the needed spacer (4MAX) already attached (incl) and one with the spacer separated (sep).
A closed door is not always better for printing and an opened door can be easily damaged. With these hinges you can remove and install the door in one second.
The hinges are more then strong enough for their purpose. They are a little bigger in size then the original ones but they fit perfectly. The original screws can be used.
A little smoothing/post-processing of the hinges can be necessary.
Distance holes is 25 mm in both directions, thickness spacer is 4.5 mm.
Happy hinging :)
Ps. Apologies for the photo quality, photographing is not my greatest talent and black on black is hard to capture.
Print Settings
Printer Brand:
Anycubic
Printer:
Semi-closed 4Max
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25% - 40%
Category: 3D Printer Parts