Quick Connect Garden Faucet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The idea is simple, create a faucet out of quick connector garden hose system
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 952
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Idea
Create a faucet so it can be easily attached and deattached so I can easily connect my garden hose to the tap in the house.
Why
In the summer I use heated water from my solar panels to fill the swimming pool (when it's very sunny I have to get rid of the hot water because it reaches 80°C).
The most convinent way of doing so is to attach my garden hose to the tap in the house.
But it requires dismounting the orginal faucet. So I replaced it with this design.
Printing remarks
Use PETG or something stronger, print with 3 perimeters and 30% grid infill (similar to profile for printing parts for your 3D Printer).
Assembly
I printed only the bigger part and pressed the hose in then secured it with zipties (the smaller part is not necessary). Try to place the quick connect as close to 3D printed part as possible. Optional print the faucet aerator, screw the aerator in and secure it with a hose clamp.
BoM
- Zipties
- Quick Connect Set
- Piece of garden hose
- Faucet aerator (M24x1 size) - optional
- Metal hose clamp - optional
Tools
- Knife to cut the hose and zipties
- Screwdriver/wrench for the hose clamp and aerator