Cap for DynaPlug Carbon Racer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement cap for the DynaPlug Carbon Racer which allows for color coding of the ends.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 728
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement cap for the DynaPlug Carbon Racer which allows you to swap the stock black plastic caps for color coded caps so you don't have to guess which end has the small plug and which end has the large plug.
I guess it could also be helpful if you misplace a cap, but the real benefit is the color coding. In my case, I chose silver == fatter aluminum “megaplug” bullet head and gold == smaller pointy brass standard head.
To be fair, a metallic Sharpie would allow you to accomplish the same thing.
Optimized for printing at 0.25mm on the Prusa Mini using PrusaSlicer. Should print fine on anything else. No supports needed.