Drip Adapter - Photon Mono SE (Anycubic MSLA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the build plate drip adapter for the Anycubic Photon Mono SE printer. It lets the resin drip back into the vat.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hi!
I made this for my Anycubic Photon Mono SE. This is the 4th iteration and can be printed at very high speed and still be functional.
Settings I used:
Line Width: 0.6mm
Layer Height: 0.28mm
Speed: 120mm/s
Material: PLA
Supports: No!
You can use finer settings but these will function fine as there is plenty of tolerance.
Please print so the text is facing up (default orientation).
You could probably print this on the Mono SE! I would suggest having something like 3mm walls and adding a drain hole or two on the side. No supports required for resin.
Probably don't use TPU or anything overly flexible or anything that will get corroded or degraded by resin.
White bracket in images (fitted) is v4 and black bracket is v3.
Enjoy!