Anet ET4+ BMG Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A BMG mount for the Anet ET4+ (and possibly the Anet ET4 Pro, not confirmed). Fits with the stock hotend and fan shroud
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1053
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Goes on top of stock fan shroud. X-axis plate → fan shroud → BMG Mount.
Should print without any supports. I printed it at 0.1mm with plenty of top and bottom solid layers for good rigidity. You may need screws longer than the included ones. It is pretty borderline but I didn't want to make it any thinner for rigidity. If you are having trouble lining the parts up, use an excessively long screw to make alignment easier, screw in the other screw, then go back and replace the long one.
STEP file included for easy modification.