Hormann Garage Door Remote Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A carrier for an HSE2 model keyfob remote control. Can optionally be fixed in the car into the USB port
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is for the Hormann micro keyfob transmitter case style HSE2.
I figured I don’t need to always carry the garage door remote around with me along with my keys. I’d rather leave it in the car – which is where I am when I use it, after all.
This is a ‘cradle’ or holder for the remote. Just remove the key ring and pop the remote into the cradle. The cradle can then be secured with a little double-sided sticky tape conveniently within reach of the driver. For my car (Renault Zoe) I’ve used the second part of this print which fits into one of the car’s USB ports.
Just print the cradle, if that’s all you need. Or use or modify the USB connector part and glue it to the rear face of the cradle. Four dots of superglue will do nicely.
I printed mine in PLA with 100% infill. Supports are not needed.