20' ISO Tank Container for your Garden Railroad - 1:29 compatible scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20' ISO Tank Container 1:29 (USA Trains) compatible
- Ocena
- 0 / 5
- Polubienia
- 87
- Pobrania
- 714
- Wydruki
- 2
- Wyświetlenia
- 3095
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
ISO Tank container I drew up in 1:29 scale and then adjusted to fit the USA trains 20' containers.
Assembly:
Note: Best to test fit everything first. Also easier to paint the parts before final assembly.
- Press tank ends into tank frames until they are flush with the inside.
- Press Hatches into tank
- Glue top and bottom bars to one end
- Place tank in frame and glue the other end to the bars.
- Glue Catwalks in place
I did not glue the tank ends to the tank or the frame ends as they are sandwiched within the frame.
25 Apr 2020 - Added tanks ends for 3" (3.5"OD) conduit or PVC pipe. Cut to 198mm
26 Apr 2020 - Added Ends for resin printing for 3" (3.5OD) conduit or PVC pipe and 1/4" styrene square tube from Evergreen or Plastruct.
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Simple Metal
Rafts:
No
Supports:
Yes
Filament: eSun PETg
Category: Models