RC1 HEADBAND PRE-STACKED, SUPPORTED, NO LABEL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our state has approved RC1 so we can't print the new version.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 853
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Our state has approved RC1 so we can't print the new version. Here are files with 0.2mm & 0.3mm spacing, with or without built in support, and with or without a tab on the front to help with warping. The Prusa label has also been removed to increase speed (sorry).
KEY TO FILES:
Use "single_covid19_shield_debossedmm.stl" for single & simple printing
02 & 03 refer to spacing (in mm) in between stacked parts.
"02_triple_supported.stl" & "02_double_supported.stl" are working very well with Prusa machines, PETG, and 0.25mm layer height, they have NO tabs in the spacings between parts
the v2 versions have tabs added in between parts that should help with warping (ABS, ASA) and should also work fine with PETG or PLA. A 0.3mm spacing version is provided for larger format printers (e.g. lulzbots).
The latest versions are those with ##mm in the name. They all have tab interfaces between the parts and have taller stacks.
Print instructions
Has been tested and easily separates with PETG and 0.25mm layer height.