GBL VENTILATOR END CAP (2 REQUIRED)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
END CAP FOR GREEN BEAN LABS 3D PRINTED VENTILATOR ASSEMBLY, 2 REQUIRED!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Public Domain
END CAP FOR GREEN BEAN LABS 3D PRINTED VENTILATOR ASSEMBLY, 2 REQUIRED!
Print instructions
PRINT IS BASED ON POLYMAKER POLYLITE PC FILAMENT
HEATED ENCLOSURE RECOMMENDED
BEST RESULTS USE MAGIGOO PC OR BUILDTAK ON THE BED SURFACE
DESIGNED TO BE PRINTED AT 100% INFILL WITHOUT SUPPORTS
RECOMMEND USING STAINLESS STEEL OR COPPER PLATED NOZZLE FOR ANTI-MICROBIAL AND CLEAN ROOM MANUFACTURE
FINISHED PRINT MUST BE ANNEALED IN AN OVEN AT 100 DEGREES CELSIUS TO RELEASE INTERNAL STRESSES AND PART CLARITY
PART CAN BE AUTOCLAVED FOR STERILIZATION AT 100 DEGREES CELSIUS
I DO NOT HAVE THIS MATERIAL IN STOCK, PLEASE VERIFY AND PRINT AT YOUR OWN RISK, BUT IT SHOULD WORK!
CC0 license, MORE PARTS COMING, 2 END CAPS REQUIRED FOR ASSEMBLY
REV MKII: ADDED SEALING LIP, THINNER PART, REDUCED PRINT TIME BY 5 HOURS.