110 Film Scanning Holder with Dividers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 110 Film Scanning Holder with dividers to keep film flat and with a thin clearance for proper focus on Epson V600.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 254
- Wydruki
- 1
- Wyświetlenia
- 1234
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I started with ThinBegin's excellent 110 film holder and tweaked it just a tiny bit so that it'd fit the “B” frame in the Epson V600 perfectly. That model is still available in case someone thinks that it'd fit their use case better.
In addition, I've added dividers to keep curled film flat to minimize Newton's rings, and I extended the interior edges just EVER so slightly to make it a bit easier to keep the film in the holder when loading.
Now that the magnet glue has cured and I've had time to mess with it, I'd say it has addressed everything I wanted to. Fewer Newton's rings, and it's super easy to clamp everything in/place/and then crop in Silverfast.
Print is easy. Just put the flat sides of both pieces on the printer bed and print away. I doubt settings matter much, but at .2, 60mm/s, with 20% infill, mine took about 5 hours to print.
I'm not super skilled - I just realized that nothing in specific really fit the bill for what I needed and I'm going to have to scan a few thousand negatives that I've since inherited, so I figured I'd save anyone else the trouble.