Industrial Christmas: An LED Light String Cover

I saw wiky1982's design and rather liked it, but it didn't fit the current standard mini lights we have in the US, which often have a safety latch on the side. So I redesigned it from scratch with a couple changes.

Changes from the original:

Slips over just the "bulb" portion of a mini light
Should fit lights between 4.4mm to 4.8mm
For 5mm LEDs, try printing scaled up 1-2%
Made the fins a uniform thickness (1mm) to make them easier to print
Decreased overhand angle of the lower slope for easy of printing
Enclosed the end so they are more "bulb" like

Fusion 360 source file NOT included because prusaprinters.org doesn't allow .f3d files. You can find it on Thingiverse.

Print instructions

Print time for 6 on a Prusa i3 Mk is about 1 hour at 0.3mm layers.

For PETG, I would recommend truing off part cooling. The thin walls at the bottom often had bad layer adhesion when part cooling was enabled. Allow bed and printed parts to cool before attempting to remove.

Due to many LED colors being a UV LED plus a phosphor, florescent filaments can have interesting color changes when lit internally.