1 / 14
GSI-GSC Bulk heads and Stakes for the LGB long flat - 1:29 Scale — zdjęcie 1
1 / 14

GSI-GSC Bulk heads and Stakes for the LGB long flat - 1:29 Scale

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bulkheads and Double-stakes to convert my LGB 53' flat cars to pulpwood cars.

Ocena
0 / 5
Polubienia
16
Pobrania
149
Wydruki
0
Wyświetlenia
875
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution

Bulkheads and Double-stakes to convert my LGB 53' flat cars to pulpwood cars.

Designed for printing with an SLA (resin) printer. I've included Chitubox project files that I used to successfully print on My Elegoo Mars printer. Yeah, I know I went a little crazy with the supports! The stakes may be printed with an FDM printer.

I've included the Drill template to make holes to fasten the bulkheads with M2 x 6mm Screws or just glue them.

Make bulkhead faces with coffee stirrers or Plastic sheet (100x105mm).

You will need to notch out the bed at each location you'd like to insert a stake for them to fit properly. (see photo) or just just make a new bed of coffee stirrers, steel mesh etc.

UPDATE: Added Chitubox bulkhead files with supports by request.

 

Filament: Siraya-Tech Resin BLU

Category: Models

Tagi