1 / 2
Flat Pump Foot for T.I.P Maxima 300
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative pump base optimized to empty a cistern.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I had to empty my cistern using my T.I.P. Maxima 300. This is a dirt water pump and has a quite high pump foot.
The cistern does not have a pump sump and the water is quite clean. So I do not need to manage bigger junk. Priority was to empty the cistern as much as possible (each centimeter counts).
So I designed this alternative pump foot with following improvements:
- lower height for emptying down to 15mm
- enlarged ground plate diameter for better stability
The model is designed to be printed without any support.
Printing Instructions
Infill: 100%
Support: no:
Filament:
- The pump foot can be printed in PETG or ASA.
- The pump ring has to be printed with TPU as it must be flexible.
History
V1.0.0
- model currently in use