DAYTONA Airsoft - hopup bucking
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printed hopup bucking for a DAYTONA airsoft gun V2 and VR2.1
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 1258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Story:
So I live in Europe and my Daytona hop-up bucking broke I didn't find any vendor that resells their hop-up buckings so I tried 3d printing one from flex.
Print it from the softest flex you can get or print I printed mine from shore 70A or 75A on a
MK3S+
I first tried a bucking with a nub but then settled on an r-hop setup - it was more consistent.
I suggest using Teflon tape or plumbing tape on the TDC hop-up grub screw in my setup it tends to loosen.
Print settings:
feel free to experiment I felt it was acceptable at this setting
LH 0.2 mm
nozzle 0.4 mm
infill 10 or 15% grioid
Better yet if you have the means make a negative mold and cast it from polyurethane (the r-hop version)
HONESTLY, IT WORKS BETTER THAN IT LOOKS