Replacement Parts for Black+Decker ¾" Spring Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These parts can be used to replace or construct a spring clamp compatible with the model from Black+Decker®
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 163
- Wydruki
- 3
- Wyświetlenia
- 897
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These parts are modeled after the ¾" spring clamp from Black+Decker® and are 100% compatible. The models can be scaled up for larger clamps but through-hole diameters may not match original part dimensions in that case.
One of my original clamps broke near the hinge bevel and I had another with a missing pad. I painstakingly modeled this after the original for form and fit. The photo doesn't show the teeth which were added afterward.
ABS/PETG is recommended for the arm and ABS/PETG or TPU for the pad. Print each part on its side (with the through-hole facing vertically) using supports.
The original spring and hinge bolt+nut are required.