Star Wars Jedi Order Extruder Visualizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Star Wars Jedi Order Extruder Visualizer 3D printed in 2 colors, white and black.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 144
- Wydruki
- 3
- Wyświetlenia
- 922
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Star Wars Jedi Order Extruder Visualizer 3D printed in 2 colors, white and black.
I do not have an Multi Material Unit (MMU) for my Prusa. I had to insert a filament change command in the G-code so I could change the color. It can be done very easily in the PrusaSlicer.
I separated the magnet post so I could print without supports. The post needs to be glued to the back with super glue.
The magnet used is 6.3 mm diameter by 3 mm thickness. They were purchased from Michaels Craft Store.
It was brought to my attention that the new Prusa printers, probably starting from beginning of 2021, the metals in the stepper motors are non magnetic. I would advise to test with a magnet to see if the visualizer will stick to the stepper motor.
Print instructions
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.15 mm
Infill:
15%
Filament_brand:
Prusament
Filament_color:
Vanilla White & Prusa Galaxy Black
Filament_material:
PLA
Notes:
Added brim for the magnet post so it would have more surface area to stick to the print bed. Also, the post prints at 100% infill.
Post-Printing
Magnet Post need to be super glued to the back. Magnet needs to be supper glued to the post.