1 / 2
Double-Sided Sensory Ball Bearing Maze
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fun ball bearing maze for kids. Uses 3/8" steel ball bearings - I used about 30 but add as many as you'd like.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 761
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (23)Powiązane
Fun ball bearing maze for kids. Uses 3/8" steel ball bearings - I used about 30 but add as many as you'd like.
Printed in PLA without supports on my Prusa MINI. Printing time, as well as bed adhesion, can be optimized by using no bottom layers. If you do this I'd suggest increasing infill % to at least 30%.
Assembly:
- Print top and bottom pieces
- Insert ball bearings into top or bottom pieces
- bolts together top and bottom pieces with five 22mm M3 screws (counter-sunk heads).