Aperture Science Weighted Cube (Portal 1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Weighted (Companion/Cargo) Cube from Portal 1. Based on a diagram Dionogard posted in 2015.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 841
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Weighted (Companion/Cargo) Cube from Portal 1.
Based on a diagram Dionogard posted in 2015. I couldn't get any of the project files to load, so the dimensions on the logo disc might be slightly off. Had a fun time learning Fusion 360 well enough to be able to do this!
The F360 project has the cube scaled at its full size of 2 feet (~60cm), but I've exported an .STL at ¼ scale. The model is solid, so if you're not into very long prints, maybe reduce the infill to 5-10%. Supports are probably a good idea, especially if you're printing bigger than ~3" or so.
I found the diagram at https://www.turbosquid.com/3d-models/free-obj-model-weighted-companion-cube-portal/917892, but it looks like the original may have been from DeviantArt: https://www.deviantart.com/dionogard/art/2-foot-Weighted-Companion-Cube-3D-Model-link-485290833
Feedback welcome! I'm largely self-taught in Fusion 360 (though I did get some amazing help on the Autodesk forums).