Trolley Token Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2 Euro trolley token & holder to attach to your keys. The holder grips the token in place so it can't fall out.
- Ocena
- 4,889 / 5
- Polubienia
- 73
- Pobrania
- 563
- Wydruki
- 10
- Wyświetlenia
- 1929
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Don't search for change the next time you need a trolley.
Attach this to your keys & all your problems are over (note: this may not solve all your problems).
The holder is best printed in PETG for flexibility, PLA will likely bend or snap when inserting or removing the coin.
I'd recommend a 0.1 layer height for the holder & slow speed with the PETG (~ 35mm/s). There are some tricky overhangs but it should print without support. My ender 3 does a good job with no supports at this layer height.
The coin is a 2 Euro size & can be printed in any material you like really, recommend a 0.2 layer height.
It is oriented face down for a smoother finish on the image side.
Once printed, the coin simply pushes into the holder & can't fall out. When you need a trolley, just pull the coin out of the holder & push it back in when you're done.