BB Speed Unloader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Speed unloader for AEG:s in to an ASG 6mm BB Bottle.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 234
- Wydruki
- 1
- Wyświetlenia
- 1595
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A very fast unloader for AEG Airsoft magazines so you don't have to fiddle with the small BB catch when you're exhausted after a long session and ruin your thumbs.
It is designed to fit onto a standard ASG Airsoft BB Bottle and is threaded so it can replace the original screw cap. The small cap on top is also threaded and fitted with a loop so you can put a rubber band between it and the bottle cap so you don't loose it.
It should work with most if not all AEG magazines.
I used a white tire marking pen to mark the weight of the BB's on mine. If you don't want to mark them permanently you could use different colours of rubberbands for the different weights.
Update: Added a new version of the cap as the current one could potentionally unscrew itself if your rubberband is a bit on the tight side. Basically just have taken the loop and rotated it 180 degrees.
Update2: Added another version of the unloader with a larger hole for the BB's to go through.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
25
Filament: Azure Film PLA Black
Category: Sport & Outdoors