Anker Nebula Capsule Ceiling Projection Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand to hold the Capsule so that it can project on the ceiling without rolling around.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 1549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
The magic of 3D printing is that you can build super niche customized items on the fly.
I wanted to use my Anker Nebula Capsule to project video on the ceiling so that I can watch video while comfortably lying in bed. There are a couple “heels” included as well that work sort of like removable high heels on a shoe, that prop up the stand to two different angles (40, and 30 degrees respectively).
I also removed all sharp corners, because why not.
Printing Notes:
Stand was printed with a 0.6mm nozzle with 0.35 layer-height for speed.
Heels were printed using 0.2mm base layer-height + 1 iteration of variable layer height applied in prusaslicer.
PLA should be fine.