1 / 1
Stego-Storage: a USB holder that looks like a Stegosaurus
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a revision of an old design I made; this one is a little smaller and prints as one piece.
- Ocena
- 4,667 / 5
- Polubienia
- 53
- Pobrania
- 246
- Wydruki
- 4
- Wyświetlenia
- 1349
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (2)Kolekcje (80)Powiązane
This is a revision of an old design I made; this one is a little smaller and prints as one piece. Has 10 standard USB sockets.
Print instructions
Support is needed everywhere. Use tweezers to take out the little bits of support found in some of the USB sockets