Quick Release Accessory Holder for T/V slot Printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to work with the Ender 3 family of printers but you may find it works elsewhere.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 886
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The modular bracket clamps on to the t-slot channel in the metal bar and locks in place with a quick release cam lever. I will be making a Reel soon to show how it works.
Modular system:
This was designed with multi-function in mind. There are many different slot in accessory holders (2 sizes of glue stick, small tray, paper/card holder, Allen/hex holder). However, it is also very simple for you to design your own accessories that will fit.
Printing:
The t-bar/slot locking pin and lever need to be printed laid down with 100% infill.
The main body of the holder needs to flex/spring a little when the lever is being clamped down so I have used 2/3 walls with 10% gyroid infill.
I have found that PLA can be strong enough for this but PETG holds up better to the tensile strength required.
I have printed all parts together on a raft to keep the dimensions more accurate.
More pictures here.
See me build it here.