1 / 2
Honeycomb Monitor Stand (BYO Timber) — zdjęcie 1
1 / 2

Honeycomb Monitor Stand (BYO Timber)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I created this model with inspiration from Erl's. I made it using chamfers instead of fillets and to fit 26mm timber.

Ocena
0 / 5
Polubienia
47
Pobrania
230
Wydruki
1
Wyświetlenia
1741
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

STEP file included to size to your preferred dimensions as this is designed specifically for 26mm timber that I had leftover from building a desk. As well as being sized in width specifically for my monitor. Length is determined by however long you cut your timber.

 

Highly recommend printing at a high layer height such as 0.28mm or more. This provides great strength over 0.20mm based on my tests. Model has a tiny 0.2mm chamfer on the bottom to help with first layer squish. Ensure the large chamfer is upright on the print bed.

Tagi