14X Headband redesigned for 0.6mm nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Prusa FaceShield RC3 redesigned for 0.6mm nozzle printing.
- Ocena
- 3,5 / 5
- Polubienia
- 0
- Pobrania
- 302
- Wydruki
- 1
- Wyświetlenia
- 1625
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of Prusa FaceShield RC3 redesigned for 0.6mm nozzle printing. The stl file contains stacked version with a gap of 0.4mm designed to be printed with layer height 0.4mm.
Version with and without logo (slightly faster printing) is available. The material type (PETG) is added for better recognition of sterilizability.
The print should take around 22 hours which is ideal for a one shift operation in the University lab etc. ...
Note: Prusa slicer is indicating toolpath out of the bed, but it is just fine on a edge and it would print.
Print instructions
Use the initial layer height same as printing one = 0.4mm.