ArtistD_Pro_Y-Pulley_Brace v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The front idler pulley on my Y axis seems to be bent over as it's only secured to the thin metal shell of the base.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
The front idler pulley on my Y axis seems to be bent over as it's only secured to the thin metal shell of the base. This little piece takes the tension off the spindle. Just remove the front brace, slot the part into the existing holes and put the brace back while fitting the new part over the nyloc nut on the front pulley.
Note that this part fits the Artist D Pro. It appears the idler location is different on the standard printer. The hex hole in the bottom of the printed part would need to be moved.
Updated - v2 brace fits but may not allow enough clearance for the printbed chassis to make it all the way to the front. The v3 model has the length of the stud shortened to be nearly flush with the face of the brace.
Print Settings
Printer:
JDMaker Artist D Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50
Filament:
Any ABS/PETG/PLA
Any
Category: 3D Printing