Customizable y rod holder for aluminium extrusion based frames
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is based on the rebelix part:https://github.com/RepRap4U/RebeliX However, my frame's profile is different, so I…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This is based on the rebelix part: https://github.com/RepRap4U/RebeliX
However, my frame's profile is different, so I fixed the problems in the scad which made the customization difficult. I've also removed the dependencies to other scads. (and replaced the czech comments with english)
The part includes a support for the plastic which goes to the slot, you might want this removed if your can manually place supports in your slicer.
The uploaded STL is set up for my profile (3030 with 6mm slot and M5 screws) It also includes the support set up for .2mm layer height.
Category: 3D Printer Parts