Corner Clamp (for use with 1 inch webbing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This "clamp" is a component. It is used with webbing and a ratchet to create a complete corner-clamp system.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 105
- Wydruki
- 6
- Wyświetlenia
- 575
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This "clamp" is a component. It is used with webbing and a ratchet to create a complete corner-clamp system. Four of these clamp pieces go on the corners of a box or cabinet, and a ratchet draws them tight. I use a ratchet and strap originally meant as a tie-down for small truck cargo.
v2 seems to work pretty well. For larger pieces you might increase the size of the mating surfaces. Enjoy.
This work is placed explicitly in the public domain.
Print instructions
I printed this with PLA, 5 perimeters, and 15% infill. That seems okay ..