Filament Spool Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool support to relocate spool on top of printer. This is designed to assemble with 20/20 aluminum extrusion (~0.8").
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 808
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Spool support to relocate spool on top of printer. This is designed to assemble with 20/20 aluminum extrusion (~0.8").
Works alongside this assembly from Thingiverse:
https://www.thingiverse.com/thing:3209211
I have used this roller system on several printers for quite a while and am very happy with it. The main motivation for this modification is to reduce bench space by relocating the spool on top of the printer.
Printed with 2 walls, 20% infill, PETG, with supports, and the part is very strong.
Assembling the T-nuts/bolts was a bit tricky, but just start with the front face and then do the top face.
Hardware:
4 x M4 T-Nut
4 x M4 x 12mm Bolt