Print-in-place Rotary Fidget Detent Knob with detent strength options
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,44 € – 0,54 € netto (bez VAT)
Dla pliku: Rotary fidget clicker 2_hard_0.2mm_PLA_MINI_36m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,49 € netto (środek widełek).
- Masa podana przez autora
- 4 g
- Czas druku podany przez autora
- 35,4 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A print place clicky knob simulator in three detent strength. No supports or bed adhesion required.
- Ocena
- 4,667 / 5
- Polubienia
- 67
- Pobrania
- 948
- Wydruki
- 8
- Wyświetlenia
- 4744
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
This fidget clicker is a neat little gadget showcasing the power of print-in-place mechanisms. Choose between three detent strength options. Simply print the desired model, break it free from the bed and with minimal cleaning up, its ready to go! This gadget also acts as a handy basic one-way ratchet that can be embedded into other mechanisms.