1 / 3
XCR3D 3in1 S1 / BigtreeTech ZSYong 3in1 Part Cooler
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple part cooler for XCR3D 3in1 S1 (non-mixing) aka BigtreeTech ZSYong 3in1 hotend
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Simple part cooler for XCR3D 3in1 S1 (non-mixing) aka BigtreeTech ZSYong 3in1 hotend, attached at the heatsink with existing fan screws, uses 50x15 blower fan.
Printed without support.