Headphones Holder fits 1/2 inch plywood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This headphones holder for my desk. Made to fit my over the head headphones, and have a snug fit to 1/2 inch surface.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a headphones holder i made to hang my headphones of the side of my desk, as they were always getting in the way. I designed it to fit a ½ inch piece of plywood, but can be modified and scaled to fit other sizes. It fits very snugly and i almost could not get it on.
For printing I have included the Gcode I used on my Prusa i3mks+ as well as the .stl file.
I recommend printing flat and putting supports in the middle of the clip part, but not too close to the walls as to make it easier to remove