Mini Razor Scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple razor blade scraper with cover.
- Ocena
- 4,5 / 5
- Polubienia
- 43
- Pobrania
- 223
- Wydruki
- 3
- Wyświetlenia
- 1258
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Fits standard size single-edge razor blades. Holds the razor at just the right angle for a "close shave."
Easy to print with no supports. Shown in two colors for clarity. The .gcode file prints both pieces at the same time.
Updated 13 SEP 2022 -- After a few uses, I noticed that the razor liked to slide out of the holder. This is because I tend to slide the razor along an edge at an angle instead of pushing straight in.
Closing the "right" side of the scraper (as viewed from the razor's edge) fixed that problem (for right-hand use). I also reduced the slot height to help hold the razor tighter.
I've updated all the files, and I added "right" and "left" versions of the holder. Print them with the closed side down. Note, the .gcode file still prints the original open sided scraper.
Print Settings
Resolution:
0.2 mm
Infill:
10%
Filament: Any brand, material, color
Category: 3D Printer Accessories