1 / 3
Extruder for Prusa i3 Rework, Groove plate and j-head 3mm mount — zdjęcie 1
1 / 3

Extruder for Prusa i3 Rework, Groove plate and j-head 3mm mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Quick and dirty modification of the standard i3 rework extruder STL to use an aluminum groove plate mount for a much…

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
363
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Quick and dirty modification of the standard i3 rework extruder STL to use an aluminum groove plate mount for a much more rigid hotend assembly.

Created because the previous extruder I used started to soften where the hotend connects to the body, causing it to deviate from vertical.

Also includes mounting holes on the side using the same 30mm spacing of the wade extruder for the standard i3, that means you can reuse fan ducts designed for it. Those holes go through so you can mount things on both sides.

An adapter is provided to reuse i3 Rework fan ducts.

Instructions

Use M5 nuts&bolts to attach the groove plate to the extruder body.

Category: 3D Printer Extruders

Tagi