1 / 7
8mm leadscrews X-ends for MendelMax 1.5 with wobble isolator
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for 8mm leadscrews and lm8uu. Check the specification image to see if the leadscrew nut matches yours. The idler…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Made for 8mm leadscrews and lm8uu.
Check the specification image to see if the leadscrew nut matches yours.
The idler is designed for a GT2 belt, meaning dual 624 bearings on a M4 bolt instead of the usual 608 and M8.
Source and instructions available at github.
Category: 3D Printer Parts