Model Maze Maniac
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 4 layer maze It is designed for a 7mm ball bearing.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 408
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution
This is a 4 layer maze.
It is designed for a 7mm ball bearing.
There are 4 levels to this maze and the idea is you can redesign level 2 and 3 to change the outcome of the top layer.
The top layer has a start logo printed into it and a ball detent included to aid you through the puzzle.
There are multiple holes and the trick is you have to go into one of these to get to the next part of the maze but which one???
Overall size - 160 x 160 x 55 (print time approx. 6hr+4hrs+4hrs+6hrs = 20hrs)
Layer 1 - Marble Maniac First Side (Top)
Layer 2 - Middle Top
Layer 3 - Middle Base
Layer 4 - Marble Maniac Second side
Cover x 2 - This is a cover for the box to merge all the parts together. you need to print two parts and can add an acetate / perspex cover to it and bolt it together.
Edit: model is finished. Cover is on and acetate is in place. 🥰