1 / 5
COVID - ONX Protective Shield (16/20 shields per day on i3 MK3S!) — zdjęcie 1
1 / 5

COVID - ONX Protective Shield (16/20 shields per day on i3 MK3S!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a protective shield optimised for fast printing on FFF 3D Printers without supports from PET-G. STL models for…

Ocena
0 / 5
Polubienia
1
Pobrania
281
Wydruki
0
Wyświetlenia
1431
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is a protective shield optimised for fast printing on FFF 3D Printers without supports from PET-G.

STL models for printing 1, 8 and 10 shields at once.

Printing 1 shield (top+bottom) takes only about 1 hour and 30 minutes.

Printing 8 shields (tops+bottoms) takes only about 11 hours and 30 minutes.

Printing 16 shields (tops+bottoms) takes only about 23 hours and 5 minutes.

Printing 20 shields (tops only) takes about 22 hours and 22 minutes.

Please see User print files section with various prepared gcode files.

One shield (top+bottom) weights about 19 grams only.

Bottom part is optimised for using with 150um or 200um transparency films.

Videos:
https://youtu.be/0qJYTsLxjY0

If you want to use this shield for health protection (for example against Covid-19) always use disinfection before and after use!

It was insipred by Prusa Face Protective Shield RC2. Dimensions are compatible with Prusa's visor.

Created by TouchWARE & ONYX Vision

Print instructions

Supports:
No

Resolution:
0.25

Filament_material:
PET-G