Making windows on the cheap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Making windows on the cheap I wanted to added a window to our out house but did not want to spend much cash in the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Making windows on the cheap
I wanted to added a window to our out house but did not want to spend much cash in the process.
Therefore I designed a 3D printed clip to hold a piece of glass that I got from the dollar store.
I used a 4 1/4 inch hole saw to crate the holes in the out house walls.
The clips were left a little loose so that the wood could expand and contract without breaking the glass.
If the glass breaks I will buy some plastic to cover the holes.
So far been through 2 winters with no issues.
Project page is here
https://www.zambadu.com/projects/windows-on-a-budget
Print instructions
Print at .2m with 15% infill
Very easy to print