RC4 prototype (what I would consider)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is what I would want to see on RC4.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 978
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is what I would want to see on RC4. It is a revised version of face shield RC3 from Prusa based on the feedback I received from several doctors. Additional features are as follows:
-Slightly inclined front plate to cover splashes from under better(10°).
-Wider shield for better protection from sides.
-Shorter shield downwards for better movement.
-No need for bottom reinforce.
Sorry for removed Prusa writings but I had to for the new extensions.
Edit: It is now ready to be produced. Proper dxf and dwg files for the front plate are added. It is not compatible with the original shield. I used laser cut 0.5mm PC sheets for front plate but PET sheets would be fine as well. I am also planning to add 4 stacked model and one with closed top.
Edit: Closed top model added. Beware that closing it even in the simplest way like this cause a 25% increase in print time.