1 / 2
3D Tiles - Wall Art — zdjęcie 1
1 / 2

3D Tiles - Wall Art

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed these tiles taking inspiration from Matthew Shlian's work: https://www.instagram.com/matthewshlian/

Ocena
0 / 5
Polubienia
181
Pobrania
811
Wydruki
0
Wyświetlenia
5941
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial

Please use wall-art-v2 for printing in vase mode!

Please print the tiles in vase mode for most efficiency. In vase mode each tile takes around an hour to print and uses only 8+ grams. The end outcome might be a bit flimsy and some of the connected edges might tear open but that shouldn't make a lot of difference visually (and also since the tiles won't be touched on a regular basis), specially if you paint these. If you are printing in vase mode, do increase the flow rate. I had mine set at 135% and it gave the best results.

I used a combination of 12 tiles to paste on top of a canvas board. Let me know in the comments if you need a better way to mount these on the wall. 

Tagi